# This is the backup of the catalog
FileSet {
  Name = "Catalog"
  Include {
    Options {
      signature = MD5
    }
    File = "/var/db/bacula/bacula.sql"
  }
}

# Client (File Services) to backup
Client {
  Name = nanako.brainwash.com-fd
  Address = nanako
  FDPort = 9102
  Catalog = MyCatalog
  Password = "XvyD1TBs/x5zx6O/VcpvtBYwoKNY7MzfB+QuBW80aVTZ"          # password for FileDaemon
  File Retention = 30 days            # 30 days
  Job Retention = 6 months            # six months
  AutoPrune = yes                     # Prune expired Jobs/Files
}

#
# Second Client (File Services) to backup
#  You should change Name, Address, and Password before using
#
#Client {
#  Name = nanako.brainwash.com2-fd                
#  Address = nanako2
#  FDPort = 9102
#  Catalog = MyCatalog
#  Password = "XvyD1TBs/x5zx6O/VcpvtBYwoKNY7MzfB+QuBW80aVTZ2"         # password for FileDaemon 2
#  File Retention = 30 days            # 30 days
#  Job Retention = 6 months            # six months
#  AutoPrune = yes                     # Prune expired Jobs/Files
#}


# Definition of file storage device
Storage {
  Name = File
# Do not use "localhost" here    
  Address = nanako                # N.B. Use a fully qualified name here
  SDPort = 9103
  Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"
  Device = FileStorage
  Media Type = File
}

# Definition of DLT tape storage device
Storage {
   Name = DLT-0    
#  Do not use "localhost" here
   Address = nanako                # N.B. Use a fully qualified name here
   SDPort = 9103
   Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"          # password for Storage daemon
   Device = DLT-0                      # must be same as Device in Storage daemon
   Media Type = DLT                  # must be same as MediaType in Storage daemon
   Autochanger = yes                   # enable for autochanger device
 }

# Definition of DLT tape storage device
Storage {
   Name = DLT-1    
#  Do not use "localhost" here
   Address = nanako                # N.B. Use a fully qualified name here
   SDPort = 9103
   Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"          # password for Storage daemon
   Device = DLT-1                      # must be same as Device in Storage daemon
   Media Type = DLT                  # must be same as MediaType in Storage daemon
   Autochanger = yes                   # enable for autochanger device
 }

# Definition of DLT tape storage device
Storage {
   Name = DLT-2    
#  Do not use "localhost" here
   Address = nanako                # N.B. Use a fully qualified name here
   SDPort = 9103
   Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"          # password for Storage daemon
   Device = DLT-2                      # must be same as Device in Storage daemon
   Media Type = DLT                  # must be same as MediaType in Storage daemon
   Autochanger = yes                   # enable for autochanger device
 }

# Definition of DLT tape storage device
Storage {
   Name = DLT-3    
#  Do not use "localhost" here
   Address = nanako                # N.B. Use a fully qualified name here
   SDPort = 9103
   Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"          # password for Storage daemon
   Device = DLT-3                      # must be same as Device in Storage daemon
   Media Type = DLT                  # must be same as MediaType in Storage daemon
   Autochanger = yes                   # enable for autochanger device
 }









# Definition of DDS tape storage device
#Storage {
#  Name = DDS-4    
#  Do not use "localhost" here
#  Address = nanako                # N.B. Use a fully qualified name here
#  SDPort = 9103
#  Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"          # password for Storage daemon
#  Device = DDS-4                      # must be same as Device in Storage daemon
#  Media Type = DDS-4                  # must be same as MediaType in Storage daemon
#  Autochanger = yes                   # enable for autochanger device
#}

# Definition of 8mm tape storage device
#Storage {
#  Name = "8mmDrive"
#  Do not use "localhost" here
#  Address = nanako                # N.B. Use a fully qualified name here
#  SDPort = 9103
#  Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"
#  Device = "Exabyte 8mm"
#  MediaType = "8mm"
#}

# Definition of DVD storage device
#Storage {
#  Name = "DVD"
#  Do not use "localhost" here
#  Address = nanako                # N.B. Use a fully qualified name here
#  SDPort = 9103
#  Password = "ezWXfqPhR6C/ZamaEInhg3BCvXH1F61rkHY7n/g9NM+Z"
#  Device = "DVD Writer"
#  MediaType = "DVD"
#}


# Generic catalog service
Catalog {
  Name = MyCatalog
# Uncomment the following line if you want the dbi driver
# dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport =  
  dbname = "bacula"; dbuser = "bacula"; dbpassword = ""
}

# Reasonable message delivery -- send most everything to email address
#  and to the console
Messages {
  Name = Standard
#
# NOTE! If you send to two email or more email addresses, you will need
#  to replace the %r in the from field (-f part) with a single valid
#  email address in both the mailcommand and the operatorcommand.
#  What this does is, it sets the email address that emails would display
#  in the FROM field, which is by default the same email as they're being
#  sent to.  However, if you send email to more than one address, then
#  you'll have to set the FROM address manually, to a single address. 
#  for example, a 'no-reply@mydomain.com', is better since that tends to
#  tell (most) people that its coming from an automated source.

#
  mailcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r"
  operatorcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
  mail = root@localhost = all, !skipped            
  operator = root@localhost = mount
  console = all, !skipped, !saved
#
# WARNING! the following will create a file that you must cycle from
#          time to time as it will grow indefinitely. However, it will
#          also keep all your messages if they scroll off the console.
#
  append = "/var/db/bacula/log" = all, !skipped
  catalog = all
}


#
# Message delivery for daemon messages (no job).
Messages {
  Name = Daemon
  mailcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r"
  mail = root@localhost = all, !skipped            
  console = all, !skipped, !saved
  append = "/var/db/bacula/log" = all, !skipped
}

# Default pool definition
Pool {
  Name = Default
  Pool Type = Backup
  Recycle = yes                       # Bacula can automatically recycle Volumes
  AutoPrune = yes                     # Prune expired volumes
  Volume Retention = 365 days         # one year
}

# File Pool definition
Pool {
  Name = File
  Pool Type = Backup
  Recycle = yes                       # Bacula can automatically recycle Volumes
  AutoPrune = yes                     # Prune expired volumes
  Volume Retention = 365 days         # one year
  Maximum Volume Bytes = 50G          # Limit Volume size to something reasonable
  Maximum Volumes = 100               # Limit number of Volumes in Pool
}


# Scratch pool definition
Pool {
  Name = Scratch
  Pool Type = Backup
}

#
# Restricted console used by tray-monitor to get the status of the director
#
Console {
  Name = nanako.brainwash.com-mon
  Password = "20uwu3nTQnH3ok8KQYpR4a8TjEZKy2CIXlVvo9G+82jj"
  CommandACL = status, .status
}